Skip to main content

Blue (Jun 2005) - how you'll turn after you've had a drive

What's better than one turbine? Two Turbines.

The Blue's most characteristic feature is the two massive turbines on the back

The Ramos Blue was the second car designed by L and it feels as if it's an evolution on the Turbo L, the driver is still seated in the centre of the car, but while the Turbo L had one turbine, the Blue has two.

But that's where the similarities end. The Blue's design is inspired by an aeroplane - in addition to the two turbines it packs a pair of tall vertical rudders installed on the back to help with steering at high speeds. Two tubes move the fuel from the gas tank directly to the twin turbines. In terms of standard equipment, it includes lights in the front and the back (indicators are unnecessary), and a steering wheel - that's it! No need for awkward gearing in a turbine, you turn it on and propel yourself forward at high speeds, and no need for a windscreen - just remember to bring a helmet and a coat as it will get cold and windy!

Out test-driver Mr Blue changing a wheel on the Ramos Blue

The steering wheel is connected to the rudder so when driving at high speeds, turning the steering wheel will move the rudder to help with sharp turns. The upper wing helps with the downforce - as the Gs attained in this car are unbelievably high due to its high overall height from the ground!

This is simply a fast car. That's the purpose of this jet-powered bullet - as that's the most appropriate name for this vehicle. The Blue is lighter and focused on one thing: speed.

The Blue is all about speed

In terms of specs the Blue is the lightest Ramos car to date at 83.1 g (at least half than all the previous vehicles) so far and also the least wide (not counting the massive wing in the back). This comes at a price, as it is actually the most expensive car available at £44.60 new!

There is another cheaper variant of the Blue with a single turbine which virtually cuts the price in half - as the turbines are the most expensive part of the car and it's available for $37, but it will only be released 

Link to this vehicle on Bricklink: https://rebrickable.com/mocs/MOC-77802/

Specifications:

No doors - Blue Cup car

2 Turbines placed on the back

Size: 15 x 6 x 9 studs (0.4 studs ground clearance)

Mass: 83.1 g

Distance between axles: 8 studs.

Volume of boot: no boot

Parts: 89 // Lots: 37

Price (June 2021): $ 49.40

In this blog I plan to add some in-depth detailed information about all the cars I built in the period between 2005-2006. The next post will be about New Speed, another racing vehicle made by L!

Comments

Popular posts from this blog

I built the Tigre!

  The bricks I ordered from Bricklink finally arrived and I was able to rebuild the Tigre once again after 16 years and one month. I also took a picture next to the Speed Champions 76897 Audi Sport Quattro S1 MOC I made which opens the hood and doors - I still want to do a few tweaks before I publish it...

Tigre (April 2005) the beginning of something wonderful

April 2005, after collecting all the yellow ramps and slopes I found in our collection, I created something that changed my enjoyment of LEGO forever, the Roadster Tigre: A recent render (using Stud.io) There are many places I could start this story: the first time I received a large Lego set (6339 Shuttle Launch Pad in 1995), the first time I acquired a Lego Racers car and some wheels, or even the first time my parents got me a bucket of lego... but this story does not start with legos, but with available technology: Summer 2004 - my first phone with a camera, the ultra-cool Nokia 3200 - besides taking photos you could also change its colour and background through changing the phone's physical background with your own custom drawings! Anyway, back to the point: I started photographing everything I could. It was a very low-resolution camera, but for the time it was my world! It wasn't good enough to take pictures of my drawings, so what else could I use the camera for... Nokia ...

Instagram + Moving from Bricklink to Rebrickable

Today I've decided to transfer my creations from Bricklink to Rebrickable... it will be a work in process for the coming weeks so bear with me while I do the transfer https://rebrickable.com/users/Ramos_cars/mocs/ I've also decided to create an instagram page some time ago to keep sharing my creations, here it goes! https://www.instagram.com/p/CO_O5tgse7G/?utm_medium=copy_link